我發覺450d的commands,與其他較新型號的canon DSLR 相機不相同,先前的 web page 已經能夠控製到大部分Canon 相機,只是eos-m和部分型號例如450d需要不同的控制command.
有 197 筆資料符合您搜尋的條件
- 週四 21 2月, 2019 09:37
- 版面: Raspberry Pi 自動導星裝置 diy Autoguiding
- 主題: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)
- 回覆: 10
- 觀看: 5000
Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)
- 週二 19 2月, 2019 20:15
- 版面: Raspberry Pi 自動導星裝置 diy Autoguiding
- 主題: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)
- 回覆: 10
- 觀看: 5000
Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)
AstroEx 3.3 被修改用於控制M3和450D。 請在第一頁下載圖像文件。 這圖像文件在樹莓Pi 3B 和 3B +上正常工作。 局限性: 無法從AstroEX設置ISO(gphoto2 --set-config ISO = XXX不起作用)。 您必須通過EOS-M攝像機的按鈕進行設置。 應該只支持EOS M10,M100,M2,M3,M5,M50,M6( http://gphoto.org/proj/libgphoto2/support.php ),但是eos-m的AstroEx 3.3 僅用我的M3測試過。 從AstroEx 3.3更改/升級: 1. web interface f...
- 週日 17 2月, 2019 18:03
- 版面: 天文攝影 Astrophotography
- 主題: 來自屯門的玩家(21年11月10日 M31 黑白))
- 回覆: 158
- 觀看: 101372
- 週日 17 2月, 2019 14:55
- 版面: 天文攝影 Astrophotography
- 主題: Moon, 15 Feb 2019
- 回覆: 3
- 觀看: 453
Re: Moon, 15 Feb 2019
加油呀,你用軟件還是用快門繩控制M5?
AstroEx 可以控制M5。
AstroEx 可以控制M5。
- 週日 17 2月, 2019 14:52
- 版面: Raspberry Pi 自動導星裝置 diy Autoguiding
- 主題: Raspberry Pi 2 and Pi 3 for Autoguiding+DSLR+GOTO
- 回覆: 84
- 觀看: 416898
Re: Raspberry Pi 2 and Pi 3 for Autoguiding+DSLR+GOTO
因為Sampson 的AstroEx ,令我再次學習電腦語言,學習如何使用command控制我的無反相機,之前我只能用紅外線控制canon m3,現在我主要用AstroEx做guiding 和遙控M3,或用Chdk 拍攝星,而AstroEx和chdk是兩個不同的操作方向,希望各位有興趣的同好繼續努力、測試及提供意見😄 多謝各位鼓勵,其實 AstroEx 只是將一些天文和拍攝軟件預載的 raspberry pi Linux OS,網路上也有許多這樣的 OS,AstroEx 再厲害的都只是安裝別人已寫好的軟件,但希望這炒什錦的 os 能符合某些攝影同好的需要,更希望藉着這華語平台介紹 Linux ...
- 週四 14 2月, 2019 23:05
- 版面: Raspberry Pi 自動導星裝置 diy Autoguiding
- 主題: Raspberry Pi 2 and Pi 3 for Autoguiding+DSLR+GOTO
- 回覆: 84
- 觀看: 416898
Re: Raspberry Pi 2 and Pi 3 for Autoguiding+DSLR+GOTO
下一個版本的 AstroEx,一定更加厲害
- 週一 11 2月, 2019 18:52
- 版面: 花鳥蟲魚 Natural World
- 主題: 香港影花鳥蟲魚的機會始終多過星星
- 回覆: 65
- 觀看: 30348
Re: 香港影花鳥蟲魚的機會始終多過星星
good pictures of wild life
- 週四 07 2月, 2019 22:50
- 版面: 香港遥控天文有限公司
- 主題: 香港天文論壇專題講座 Hong Kong AstroForum Special Lecture in Astronomy 23/2/2019
- 回覆: 19
- 觀看: 6718
Re: 香港天文論壇專題講座 Hong Kong AstroForum Special Lecture in Astronomy
- 週三 06 2月, 2019 19:25
- 版面: 花鳥蟲魚 Natural World
- 主題: Happy New Year to all my friends.
- 回覆: 5
- 觀看: 1221
- 週五 25 1月, 2019 08:53
- 版面: 花鳥蟲魚 Natural World
- 主題: 香港影花鳥蟲魚的機會始終多過星星
- 回覆: 65
- 觀看: 30348
- 週日 23 12月, 2018 15:30
- 版面: Raspberry Pi 自動導星裝置 diy Autoguiding
- 主題: 本地製作 AstroEx (DSLR web control + Lin guider / phd2 dither + Polemaster)
- 回覆: 68
- 觀看: 16777215
Re: 本地製作 AstroEx (DSLR web control + Lin guider / phd2 dither + Polar alignment tool)
使用web control:以browser 開10.0.0.1, 十分穩定。 Kstar 的 舊版本不穩定,而每一次更新版本的穩定性都改善了😊。你可以在X terminal輸入以下command更新至3.0.0 sudo apt-get update sudo apt-get dist-upgrade 怪不得楼主做了web control,我深度的用用。也期待ekos能更成熟些。 [茶] 我升級到Kstars3.0.0, indi-gphoto 升級到 version 2.6~201812201223~ubuntu18.04.1, 但是 ekos 無法控制佳能M3, 用web contro...
- 週六 22 12月, 2018 07:53
- 版面: Raspberry Pi 自動導星裝置 diy Autoguiding
- 主題: 本地製作 AstroEx (DSLR web control + Lin guider / phd2 dither + Polemaster)
- 回覆: 68
- 觀看: 16777215
Re: 本地製作 AstroEx (DSLR web control + Lin guider / phd2 dither + Polar alignment tool)
几次用下来,稳定性真是不佳(可能也是本人的水平和运气较差) [壓力] , 遇到的问题有 1. qhy5L2在PHD2中开始loop时总报错,换indi-web启动驱动后好了些 2.Kstar、ekos中拍摄中频繁闪退 3.ekos图像解析功能页不知哪个条件没具备造成按钮都是虚的不能操作,不断的重启indi和ekos,莫名其妙的由好了。 使用web control:以browser 開10.0.0.1, 十分穩定。 Kstar 的 舊版本不穩定,而每一次更新版本的穩定性都改善了😊。你可以在X terminal輸入以下command更新至3.0.0 sudo apt-get update sud...
- 週五 14 12月, 2018 21:58
- 版面: Raspberry Pi 自動導星裝置 diy Autoguiding
- 主題: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)
- 回覆: 10
- 觀看: 5000
Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)
ligphoto2: 2.5.19 (M3 did not capture image properly via web control for version 2.5.20, 2.5.21 and development version); The main developer, Marcus Meissner replied: "There was a bug I introduced in git... I fixed it in libgphoto2 git, it will be in 2.5.22. Ciao, Marcus" Once the bug is fixed, I s...
- 週三 12 12月, 2018 14:03
- 版面: Raspberry Pi 自動導星裝置 diy Autoguiding
- 主題: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)
- 回覆: 10
- 觀看: 5000
Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)
Some files were modified for Canon EOS 450D. The kernel was upgraded to 4.14.87-v7. The new image is available for download.
- 週二 11 12月, 2018 07:35
- 版面: Raspberry Pi 自動導星裝置 diy Autoguiding
- 主題: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)
- 回覆: 10
- 觀看: 5000
AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)
Thanks to the effort made by QK Sampson, AstroEx3 was upgraded from AstroEx2. AstroEx2 and AstroEx3 can control most Nikon and Canon Cameras (except my EOS M3). On AstroEx2 version, I modified some gphoto2 comands so my Canon EOS M3 can be operated. AstroEx 3.3 was modified for controlling M3 and 45...