layanata新玩具 - 自製 230mm 牛頓反射鏡
-----------layanata 寫:我諗住今個星期六日整, 明天我中午會去觀塘線那邊, 唐生你得閒嗎?
其實我要的不多, 只是七小塊就夠了(鏡身四塊, 底座三塊).
我明天在地鐵站將Teflon交给你。
你呢枝牛頓式反射鏡 Dob 同以下網頁介紹果枝R.F.ROYCE名牌差不多。我認為最好做成可以2用,即係可以用作Dob 及可以裝上赤道儀。
http://www.rfroyce.com/10f6tel/
-
- 夸克星
- 文章: 3847
- 註冊時間: 週四 09 10月, 2003 21:06
Dear Mr. layanata,layanata 寫:Subaru 太誇獎啊! 陳sir那些都是Truss tube Newtonian呢, 只是我用鋁材.
之前整六吋, 因為想輕便, 結果結構不是十分穩固.
今次全都用較厚較粗的材料, 結果打破了目標中的二十磅, 不知道能否載上LXD75或者CG5. (更加不敢載上你的LN mount呢!)
再透露一些吧...
如果這支鏡測試過, 結構沒有問題的話, 還有一支六吋短焦鏡會出世啊!
之後會再重造原先的六吋f6的鏡身.
A f/4 Newtonian is a difficult telescope, hard to make and, most importantly, hard to collimate.
Being an user of short Newtonians ( my 7 inch is a f/4, 20 inch is also an f/4, 24 inch is a f/3.5, the will-be 30 inch is a f/2.87 ) for several decades I feel that a f/6 will be most apprppriate, touching both world of planetary and deep sky observation without to bulky a tube.
My 7 inch is a mistake. Big telescopes need to be short. But you don't have these constraints.
Best regards
Chan Yuk Lun
誰在線上
正在瀏覽這個版面的使用者:沒有註冊會員 和 25 位訪客