如何有效消除金屬支架的振動?
如何有效消除金屬支架的振動?
如何有效消除金屬支架的振動?
有什么方法, 或者材料, 可以有效地消除/吸收鏡筒鋁金屬支架的震動?
最好安裝在什么地方? (支架上? 接口上?)
麻煩各位提議下~
有什么方法, 或者材料, 可以有效地消除/吸收鏡筒鋁金屬支架的震動?
最好安裝在什么地方? (支架上? 接口上?)
麻煩各位提議下~
大佬!不敢當。kai 寫:funooooo....oooooo 師兄funoooo 寫:類似海棉東西。Wah!! 寫:什么是 EVA?
想一問,是否硬的東西相對要用硬的東西才能(砥)消震動?
如果可以EVA 是否需要加壓才更好.......
以下是我的意見,未必正確。大家研究一下:
我認為不一定加壓,反而軟一點會好D.
1. 它的目的如人的軟組織 (軟骨) 去吸收所有震動,產生避震功效。所以太硬就失去吸震目的。
2. 太硬未必做到填充所有空間,吸震效果會减弱。
原理和 Meade Vibration Isolation Pads 一樣。
http://www.grandeye.com.hk/7yearsale.htm
Hugh density polyurethane foam has a good shocking absorbent property and therefore is found in filling car bumpers and parts needed to absorb sudden shock waves. The low density product gives a good resilient property but do not have much room to work as a shock absorbent. Select a medium to high density product should be just fine for you. You can find those products in the shops in Shanghai Street selling insulation products.Wah!! 寫:google 找不到 "HDPU", 係唔係即係 PU 膠呀?
係香港買唔買得到? 貴唔貴呢?
係唔係都建議按裝在接口位? 還是作為鋁管填充?
誰在線上
正在瀏覽這個版面的使用者:沒有註冊會員 和 20 位訪客