Dear ATMers,
A machine will save lots of power comparing to polishing a mirror by hand. Furthermore the end result would be more controllable.
To begin with we had to fetch out our old machine in the store room, assembled it and did little reconstruction work. This old machine was designed for 30 inch mirror and we needed to make another turn-table for the present 26 inch mirror.
We had spent one week to complete refurbishing the polishing machine.
The second round polishing was about to begin.
Best regards
Chan Yuk Lun
4 April 2014
The making of 26 incg DK telescope -7, polishing machine
-
- 夸克星
- 文章: 3847
- 註冊時間: 週四 09 10月, 2003 21:06
The making of 26 incg DK telescope -7, polishing machine
- 附加檔案
-
- Completed polishing machine
- 15.jpg (341.15 KiB) 已瀏覽 3232 次
-
- polishing machine under assembling.
- 14.jpg (306.04 KiB) 已瀏覽 3232 次
-
- 夸克星
- 文章: 3847
- 註冊時間: 週四 09 10月, 2003 21:06
-
- 夸克星
- 文章: 3847
- 註冊時間: 週四 09 10月, 2003 21:06
誰在線上
正在瀏覽這個版面的使用者:沒有註冊會員 和 30 位訪客