The making of 30 inch telescope - 1, arrival of mirror blank

自製天文望遠鏡 牛頓望遠鏡 杜蘇式 卡式 設計和磨鏡方法<br>
佛科試鏡法 佛科刀片儀 光柵試鏡法 光柵片
Chanlunlun
夸克星
文章: 3847
註冊時間: 週四 09 10月, 2003 21:06

文章 Chanlunlun » 週五 18 3月, 2005 10:51

XR250 寫: Beside money and schedule, do you have any contingency plan for the 1" glass?
Can you share your plan with us?
Dear Mr. XR250,

1" thickness is rather sufficient for safety handling and so we do not have any contigency plan.

However we do have a contigency plan for silvering of the mirror - in case silvering fail ( which is quite difficult to happen ) we are ready for another round ( we are sure we have siufficuent silver nitrate on hand ) immediately.

For your information here is my planning that I would like to share with you :-

1.Construction of human fresh mirror grinding, polishing and figuring machine. It's nearly completed at the moment.

2. Load sharing time table for each student of the human fresh grinding machine.

3. Plenty and plenty of #40 carborandum for rough grinding of mirror. ( 50 lbs may be !! )

4. Hard working, hard working and hard working for 3 hours per day, 6 days per week.

Here's my planning at the moment. I'm welcoming your comment, if any.

Best regards
Chan Yuk Lun

回覆文章

回到「自製天文望遠鏡 Amateur Telescope Making 」

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 8 位訪客