自製和廠制天文台
-
Chanlunlun
- 夸克星
- 文章: 3847
- 註冊時間: 週四 09 10月, 2003 21:06
文章
由 Chanlunlun » 週日 08 2月, 2009 21:40
Dear ATMers,
After months and months of waiting we finally got started at the real big thing. The construction of the dome was started up at 0900 hrs sharp this morning ( Saturday ) and things were kept running rather smoothly.
Before dusk the wall panels of the dome was all completed and the two hemispherical doom halves was also assembled.
As the sun started to sink below horizon we had to put a halt on the work. Final assemble will be carried out tomorrow Sunday.
Best regards
Chan Yuk Lun
7th February 2009
-
附加檔案
-
- Wall panels. You can see the pulleys for supporting the weight and providing free rotation of the dome.
- 23.jpg (76.22 KiB) 已瀏覽 12294 次
-
- Putting up the skirt plate – this is used to protect against rain from leaking into the inside of the dome.
- 22.jpg (81.25 KiB) 已瀏覽 12294 次
-
- Before starting of job it is essential to mark the position of door way first.
- 21.jpg (80.72 KiB) 已瀏覽 12294 次
-
alget
- 夸克星
- 文章: 2642
- 註冊時間: 週三 02 4月, 2008 11:14
- 來自: Axis
-
聯繫:
文章
由 alget » 週日 08 2月, 2009 21:41
很強的透視......
Ultra-wide?
-
Chanlunlun
- 夸克星
- 文章: 3847
- 註冊時間: 週四 09 10月, 2003 21:06
文章
由 Chanlunlun » 週日 08 2月, 2009 21:42
More pictures......
-
附加檔案
-
- Putting the final piece of wall panel into place.
- 27.jpg (60.43 KiB) 已瀏覽 12283 次
-
- Wall panels half finished.
- 26.jpg (77.96 KiB) 已瀏覽 12283 次
-
- After the finishing the skirt plates, wall panels were then put into place.
- 25.jpg (78.95 KiB) 已瀏覽 12283 次
-
Chanlunlun
- 夸克星
- 文章: 3847
- 註冊時間: 週四 09 10月, 2003 21:06
文章
由 Chanlunlun » 週日 08 2月, 2009 21:44
more pictures...
-
附加檔案
-
- Drilling 28 holes for the foundation bolts. Hard job !!
- 31.jpg (102.52 KiB) 已瀏覽 12274 次
-
- A very very special ( at astronomical price ) hydraulic drill for drilling the foundation holes for the bolts.
- 30.jpg (78.76 KiB) 已瀏覽 12274 次
-
- After putting all the wall panels into place we must check for true roundness by a long diameter bar before drilling of foundation bolts.
- 29.jpg (78.42 KiB) 已瀏覽 12274 次
-
Chanlunlun
- 夸克星
- 文章: 3847
- 註冊時間: 週四 09 10月, 2003 21:06
文章
由 Chanlunlun » 週日 08 2月, 2009 21:46
more pictures.....
-
附加檔案
-
- Upon finishing of wall panels, assembling of the dome halves started right ahead.
- 32.jpg (57.08 KiB) 已瀏覽 12265 次
-
- Wall panels finished. KK and WongSir stand next to me, offering congratulations.
- 28.jpg (100.94 KiB) 已瀏覽 12265 次
-
Chanlunlun
- 夸克星
- 文章: 3847
- 註冊時間: 週四 09 10月, 2003 21:06
文章
由 Chanlunlun » 週日 08 2月, 2009 21:49
more pictures........
-
附加檔案
-
- End of today’s work. From teh elongated shadow of me you can tell that it is now approaching dusk. Final assembling will be started tomorrow Sunday.
- 34.jpg (91.14 KiB) 已瀏覽 12257 次
-
- Dome halves assembling finished.
- 33.jpg (86.18 KiB) 已瀏覽 12257 次
-
Chanlunlun
- 夸克星
- 文章: 3847
- 註冊時間: 週四 09 10月, 2003 21:06
文章
由 Chanlunlun » 週日 08 2月, 2009 21:52
alget 寫:很強的透視......
Ultra-wide?
Dear Mr. Alget,
Yes. a 17mm lens on a Canon EOS 5D Mark II Full Frame DSLR.
Best regards
Chan Yuk Lun
-
bingsze
- 夸克星
- 文章: 3939
- 註冊時間: 週一 15 1月, 2007 18:13
- 來自: hong kong
文章
由 bingsze » 週一 09 2月, 2009 09:56
你的熱誠和才華令人十分佩服！
鏡神，你好野！ ![[Good Job]](./images/smilies/onion_d5f02ecd.gif "Good Job")
-
Chanlunlun
- 夸克星
- 文章: 3847
- 註冊時間: 週四 09 10月, 2003 21:06
文章
由 Chanlunlun » 週一 09 2月, 2009 13:11
bingsze 寫:你的熱誠和才華令人十分佩服！
鏡神，你好野！
Dear Mr. BingSze,
Thank you, I am flattered.
Please be reminded that I'm just another ordinary man trying to offer some effort in promoting astronomy in HK.
Best regards
Chan Yuk Lun
-
Eddy So
- 夸克星
- 文章: 16078
- 註冊時間: 週四 04 12月, 2008 22:35
- 來自: 中男海
文章
由 Eddy So » 週一 09 2月, 2009 17:46
Chanlunlun 寫:bingsze 寫:你的熱誠和才華令人十分佩服！
鏡神，你好野！
Dear Mr. BingSze,
Thank you, I am flattered.
Please be reminded that I'm just another ordinary man trying to offer some effort in promoting astronomy in HK.
Best regards
Chan Yuk Lun
請問此圓頂位置在那裡？
-
alget
- 夸克星
- 文章: 2642
- 註冊時間: 週三 02 4月, 2008 11:14
- 來自: Axis
-
聯繫:
文章
由 alget » 週一 09 2月, 2009 17:48
Eddy So 寫:
請問此圓頂位置在那裡？
Search post 啦. [茶]
-
Eddy So
- 夸克星
- 文章: 16078
- 註冊時間: 週四 04 12月, 2008 22:35
- 來自: 中男海
文章
由 Eddy So » 週一 09 2月, 2009 17:53
alget 寫:Eddy So 寫:
請問此圓頂位置在那裡？
Search post 啦, 廢人. [茶]
我不是向兄台提問，兄台何出此言？
請兄台息怒，萬事以和為貴，千萬不要影響其他人。
-
alget
- 夸克星
- 文章: 2642
- 註冊時間: 週三 02 4月, 2008 11:14
- 來自: Axis
-
聯繫:
文章
由 alget » 週一 09 2月, 2009 17:57
The answer can be found in the forum, I just advice you making the good use of the sources.
Use the source, Luke! [爽]
>萬事以和為貴
你做到後再同我講呢句吧......
-
Chanlunlun
- 夸克星
- 文章: 3847
- 註冊時間: 週四 09 10月, 2003 21:06
文章
由 Chanlunlun » 週一 09 2月, 2009 21:13
Eddy So 寫:Chanlunlun 寫:bingsze 寫:你的熱誠和才華令人十分佩服！
鏡神，你好野！
Dear Mr. BingSze,
Thank you, I am flattered.
Please be reminded that I'm just another ordinary man trying to offer some effort in promoting astronomy in HK.
Best regards
Chan Yuk Lun
請問此圓頂位置在那裡？
Dear Mr. So,
Our observatory locates down town Causeway Bay, just next to MTR station, a very conveniet spot.
Best regards
Chan Yuk Lun
-
funoooo
- 夸克星
- 文章: 7831
- 註冊時間: 週五 30 6月, 2006 16:34
-
聯繫:
文章
由 funoooo » 週一 09 2月, 2009 21:40
When we can come to take a look your great job?
![[完美計劃]](./images/smilies/onion_cd08785a.gif "完美計劃")
誰在線上
正在瀏覽這個版面的使用者：沒有註冊會員 和 26 位訪客
