PVC tube

自製天文儀器 望遠鏡腳架 赤道儀 杜蘇式<br> 開放式衍架式 鏡筒 望遠鏡配件 主鏡座 副鏡座
回覆文章
主序星
文章: 268
註冊時間: 週三 31 3月, 2004 00:16
來自: Hong Kong
聯繫:

PVC tube

文章 » 週五 30 4月, 2004 23:22

有冇人知7"既pvc 筒邊到有得賣???幾多錢???~~~
Thx~~~~~~~~ :D :D

頭像
Wongsir
壇主
文章: 3991
註冊時間: 週六 28 6月, 2003 12:03
聯繫:

Re: PVC tube

文章 Wongsir » 週六 01 5月, 2004 00:02

浩 寫:有冇人知7"既pvc 筒邊到有得賣???幾多錢???~~~
Thx~~~~~~~~ :D :D
7" pvc tube is quite heavy.
You can find the supplier's address from diy column--
diy 材料供應商一覽表.

http://www.hkastroforum.net/wonglung/te ... ress-e.htm

Wongsir
30-4-2004

主序星
文章: 268
註冊時間: 週三 31 3月, 2004 00:16
來自: Hong Kong
聯繫:

文章 » 週六 01 5月, 2004 00:27

How heavy???and how much??
Which shop i can find the tubes???膠喉管that one???
May Wongsir suggest a solution??

頭像
Wongsir
壇主
文章: 3991
註冊時間: 週六 28 6月, 2003 12:03
聯繫:

文章 Wongsir » 週六 01 5月, 2004 00:40

浩 寫:How heavy???and how much??
Which shop i can find the tubes???膠喉管that one???
May Wongsir suggest a solution??
It's --明生五金 --膠喉管.坑渠蓋 .
You will come tommorow, aren't you?
I will discuss with you then.

Wongsir
1-5-2004

頭像
Subaru
夸克星
文章: 6693
註冊時間: 週三 02 7月, 2003 19:27

文章 Subaru » 週六 01 5月, 2004 00:46

For your 6" miirror, a tube with diameter of at least 7.5"-8" is required to provide enough clearance from the edge of the mirror to the tube wall. Don't remember the mirror mount requires some clearance as well.

I may suggest you to roll an Aluminium or 鐵皮筒.

bandofbrother
主序星
文章: 183
註冊時間: 週四 25 12月, 2003 19:38

文章 bandofbrother » 週六 01 5月, 2004 01:30

智通既鏡筒都幾輕下!!!!!

主序星
文章: 268
註冊時間: 週三 31 3月, 2004 00:16
來自: Hong Kong
聯繫:

文章 » 週六 01 5月, 2004 01:49

Would u pls tell me where to buy and how much for rolling Al or 鐵皮 tube, Subaru????

thx Subaru and Wongsir

主序星
文章: 268
註冊時間: 週三 31 3月, 2004 00:16
來自: Hong Kong
聯繫:

文章 » 週日 02 5月, 2004 12:59

could anybody help me?

頭像
Subaru
夸克星
文章: 6693
註冊時間: 週三 02 7月, 2003 19:27

文章 Subaru » 週日 02 5月, 2004 13:37

浩 寫:Would u pls tell me where to buy and how much for rolling Al or 鐵皮 tube, Subaru????

thx Subaru and Wongsir
你可以去d卷鐵皮鋪問問. 我以前去灣仔春源街整, 唔記得幾錢.

我有一支好舊的鐵皮筒, 在大嶼山, 係我以前支自製6" f/8用的, 不過頭尾無加固環, 唔係好堅固, 如果你想拿嚟用, 可以問問KingArthur點去拿.

主序星
文章: 268
註冊時間: 週三 31 3月, 2004 00:16
來自: Hong Kong
聯繫:

文章 » 週一 03 5月, 2004 21:05

how is the situation of the tube???

by the way, how to calculate the clearance of the tube???
PVC reli so heavy?????

thx ~!!!!! :oops: :oops: :oops:

頭像
Subaru
夸克星
文章: 6693
註冊時間: 週三 02 7月, 2003 19:27

文章 Subaru » 週一 03 5月, 2004 21:49

浩 寫:1. how is the situation of the tube???
2. how to calculate the clearance of the tube???
PVC reli so heavy?????

thx ~!!!!! :oops: :oops: :oops:
1. 你要自己去睇睇, 應該還用得.
2. 請參考Wongsir本書第十二章 望遠鏡的配件和組裝.

主序星
文章: 268
註冊時間: 週三 31 3月, 2004 00:16
來自: Hong Kong
聯繫:

文章 » 週一 03 5月, 2004 22:35

where is it???

頭像
Subaru
夸克星
文章: 6693
註冊時間: 週三 02 7月, 2003 19:27

文章 Subaru » 週一 03 5月, 2004 22:50

浩 寫:where is it???
Please contact KingArthur. It's in his hut.

主序星
文章: 268
註冊時間: 週三 31 3月, 2004 00:16
來自: Hong Kong
聯繫:

文章 » 週一 03 5月, 2004 23:48

thx~!!!!!!!! :)

回覆文章

回到「自製天文儀器 diy Astro Equipment」

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 9 位訪客