冷凍ccd制冷問題

自製天文儀器 望遠鏡腳架 赤道儀 杜蘇式<br> 開放式衍架式 鏡筒 望遠鏡配件 主鏡座 副鏡座
回覆文章
頭像
kurt
紅巨星
文章: 577
註冊時間: 週六 23 10月, 2004 03:40
來自: 天水圍

冷凍ccd制冷問題

文章 kurt » 週三 01 6月, 2011 17:52

現在用的Sbig ST8300m 的制冷效能是約室溫 -35c , 但發覺近來晚上氣溫已經達到 27-28c , 結果ccd 的溫度只能降到-8c 左右, 效果不是太理想
不知可有辦法做二級冷凍,如把ccd camera外殼冷凍或造一個冷凍盒把ccd camera 整個冷凍......????? :? :?
有師兄有辦法嗎??
thanks

頭像
Wah!!
夸克星
文章: 13283
註冊時間: 週一 15 3月, 2004 21:28
聯繫:

文章 Wah!! » 週三 01 6月, 2011 18:09

我只知道, 外置冷凍盒的制冷功率, 一定要大於CCD的(冷凍片)發熱功率.
其他的要請教高手.


頭像
kurt
紅巨星
文章: 577
註冊時間: 週六 23 10月, 2004 03:40
來自: 天水圍

文章 kurt » 週三 01 6月, 2011 19:47


頭像
noodle
夸克星
文章: 2835
註冊時間: 週五 04 7月, 2003 16:34
來自: 地球
聯繫:

文章 noodle » 週三 01 6月, 2011 20:03

kurt 寫:
you mean I need to change and buy another camera??
35C delta 系ST8300M"特性",都幾難"改" :)
如果太低溫又可能會結霜。

syyuen168
夸克星
文章: 3856
註冊時間: 週五 06 7月, 2007 23:06

文章 syyuen168 » 週三 01 6月, 2011 20:21

Cheap cheap 地放ge话,我第一个排隊 :D :D :roll:

頭像
noodle
夸克星
文章: 2835
註冊時間: 週五 04 7月, 2003 16:34
來自: 地球
聯繫:

文章 noodle » 週三 01 6月, 2011 20:30

syyuen168 寫:Cheap cheap 地放ge话,我第一个排隊 :D :D :roll:
你系唔系有興趣先??

syyuen168
夸克星
文章: 3856
註冊時間: 週五 06 7月, 2007 23:06

文章 syyuen168 » 週三 01 6月, 2011 20:41

如果夏天晚上温度高达30C,difference 得返5 度,8300力水唔係好夠,終有一天忍唔住,就一部就到位 :roll: :roll:

頭像
Subaru
夸克星
文章: 6693
註冊時間: 週三 02 7月, 2003 19:27

文章 Subaru » 週三 01 6月, 2011 21:57

無錯, 佢地等緊你:
1. FLI ML8300: -60C delta
2. QSI683WSG: -50C delta, water cooled

或一步到位, 直上16803.

頭像
cwlam
白矮星
文章: 803
註冊時間: 週一 03 8月, 2009 09:07
來自: Tin Shui Wai

文章 cwlam » 週三 01 6月, 2011 22:09

睇嚟就快有st8300放,有意者可留意留意,hahaha…

syyuen168
夸克星
文章: 3856
註冊時間: 週五 06 7月, 2007 23:06

文章 syyuen168 » 週三 01 6月, 2011 22:15

所言甚是, 其實价錢及引, 真係可以考慮 :D :D
cwlam 寫:睇嚟就快有st8300放,有意者可留意留意,hahaha…

anyone
夸克星
文章: 14338
註冊時間: 週六 07 2月, 2009 12:13
來自: hong kong

文章 anyone » 週三 01 6月, 2011 22:16

syyuen168 寫:所言甚是, 其實价錢及引, 真係可以考慮 :D :D
cwlam 寫:睇嚟就快有st8300放,有意者可留意留意,hahaha…
Mr .Yuen go go go la ! :D

syyuen168
夸克星
文章: 3856
註冊時間: 週五 06 7月, 2007 23:06

文章 syyuen168 » 週三 01 6月, 2011 22:18

Depends on the price :mrgreen: :mrgreen: :mrgreen:
anyone 寫:
syyuen168 寫:所言甚是, 其實价錢及引, 真係可以考慮 :D :D
cwlam 寫:睇嚟就快有st8300放,有意者可留意留意,hahaha…
Mr .Yuen go go go la ! :D

頭像
Subaru
夸克星
文章: 6693
註冊時間: 週三 02 7月, 2003 19:27

文章 Subaru » 週三 01 6月, 2011 22:21

syyuen168 寫:Depends on the price :mrgreen: :mrgreen: :mrgreen:
anyone 寫:
syyuen168 寫:所言甚是, 其實价錢及引, 真係可以考慮 :D :D
cwlam 寫:睇嚟就快有st8300放,有意者可留意留意,hahaha…
Mr .Yuen go go go la ! :D
Price is not an issue for Mr. Yuen.

PTS
夸克星
文章: 17242
註冊時間: 週日 28 10月, 2007 08:50
來自: HK

Re: 冷凍ccd制冷問題

文章 PTS » 週四 02 6月, 2011 09:30

kurt 寫:現在用的Sbig ST8300m 的制冷效能是約室溫 -35c , 但發覺近來晚上氣溫已經達到 27-28c , 結果ccd 的溫度只能降到-8c 左右, 效果不是太理想
不知可有辦法做二級冷凍,如把ccd camera外殼冷凍或造一個冷凍盒把ccd camera 整個冷凍......????? :? :?
有師兄有辦法嗎??
thanks
There are several points you may need to consider:

1. adding a 2nd stage is one, but you need to consider the mechanical modifications involved, and the electrical power requirement. You also need to modify the cooling. The cooling fan may not be able to handle the extra heat.

2. you may also change the cooling fan (air cool) to water cool. Of course, you may also like to cool the cooling water (there are many of such device for computer CPU, available in Golden Arcade). This way you will control the hot side of the Peltier device to the temperature of the cooling water (say 4 or 6 degree C, then you can have about -30C for the CCD. This is a better way because the temperature can be kept fairly stable (as compared with the air cool method). Of course this method requires more modifications.

PTS

回覆文章

回到「自製天文儀器 diy Astro Equipment」

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 7 位訪客