Modification of the locking bolt for my 10-kg counter weight of my Trident P75 mount

自製天文儀器 望遠鏡腳架 赤道儀 杜蘇式<br> 開放式衍架式 鏡筒 望遠鏡配件 主鏡座 副鏡座
回覆文章
PTS
夸克星
文章: 17247
註冊時間: 週日 28 10月, 2007 08:50
來自: HK

Modification of the locking bolt for my 10-kg counter weight of my Trident P75 mount

文章 PTS » 週二 17 1月, 2023 13:05

Modification of the locking bolt for my 10-kg counter weight of my Trident P75 mount

The 10 kg counter weight has a 40 mm hole to accommodate the 40-mm shaft. A single 8-mm grub screw is employed for locking the counter weight to the shaft. However, the threaded hole is not oiled and the grub screw cannot be turned due to severe rusting. I am also not happy with the way to lock the counter weight directly with a grub screw.

Thus I decide to modify this lock by adding a brass rod between the counter weight shaft and the locking screw. This will result in a more reliable lock and less damage to the shaft.
附加檔案
DSC_2742.JPG
DSC_2742.JPG (2.79 MiB) 已瀏覽 1659 次
DSC_2746.JPG
DSC_2746.JPG (4.99 MiB) 已瀏覽 1659 次
DSC_2747.JPG
DSC_2747.JPG (2.94 MiB) 已瀏覽 1659 次

回覆文章

回到「自製天文儀器 diy Astro Equipment」

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 13 位訪客