如何stack LRGB
thanks sn-10sn-10 寫:1, Open both photos (your L and RGB) in photoshop.
2, Click on the L, ctrl A, ctrl c.
3, Click on the RGB, ctrol v.
4, you will see two layers on the RGB (you can close the L now); click on the top layer.
5, change blending mode to Luminosity.
That's it!
because I am using Qhy 9 to take LRGB
after I finish the shoots with LRGB filter I will have four photos which are B/W (am iI right??)
so how to set the B/W RGB to real RGB??
I think I am so stupid to do the photo process
I see. It's a bit tricky, you need to use "clipping masks"kurt 寫:thanks sn-10sn-10 寫:1, Open both photos (your L and RGB) in photoshop.
2, Click on the L, ctrl A, ctrl c.
3, Click on the RGB, ctrol v.
4, you will see two layers on the RGB (you can close the L now); click on the top layer.
5, change blending mode to Luminosity.
That's it!
because I am using Qhy 9 to take LRGB
after I finish the shoots with LRGB filter I will have four photos which are B/W (am iI right??)
so how to set the B/W RGB to real RGB??
I think I am so stupid to do the photo process
Let try to summarize the procedure as follows:
1, Open all layers.
2, R is the base layer, paste G on top of R, and then B on top of G.
3, Close the G and B files.
4, Change the G and B layers to screen, keeping R to normal.
5, Go the R, change mode to RGB; then layer>new adjustment layer>hue/saturation
6, Click the clipping option, rename it to H/S R (or whatever name you want it for identification), then OK.
7, You will see the Hue/Saturation box pops up, select colorize, then enter the color values. For R channel, you can start with Hue:360 Sat:100 Lightness: -50.
8, OK.
9, Repeat 5-8 for G and B, except that the values for G and B are:
G: 120, 100, -20
B: 240, 100, -40
10, Flatten it.
11, Further tweaking the colors.
12, Paste the L on top of it for further processing.
Another way to do it is to re-mode all RGB at once separately, then extract one channel from each one to replace the original one to the other one. The principle is the same, however.
Hope that helps.
P.S. This is only my method, the accuracy is not ensured. I'm sure you can find other ways to do it from the internet.
Re: 如何stick LRGB
洗乜噤愁呀, 你用緊果隻software咪用來做呢樣嘢囖:kurt 寫:完全唔明
Image -> LRGB Color Synthesis -> 揀mode揀file -> Apply
Re: 如何stick LRGB
係??等我試下先Subaru 寫:洗乜噤愁呀, 你用緊果隻software咪用來做呢樣嘢囖:kurt 寫:完全唔明
Image -> LRGB Color Synthesis -> 揀mode揀file -> Apply
Re: 如何stick LRGB
係咪你都用緊果個??kurt 寫:係??等我試下先Subaru 寫:洗乜噤愁呀, 你用緊果隻software咪用來做呢樣嘢囖:kurt 寫:完全唔明
Image -> LRGB Color Synthesis -> 揀mode揀file -> Apply
Re: 如何stick LRGB
我邊有你噤有米同高級玩LRGB, 同埋呢排好忙, 無機會影嘢.kurt 寫:係咪你都用緊果個??kurt 寫:係??等我試下先Subaru 寫:洗乜噤愁呀, 你用緊果隻software咪用來做呢樣嘢囖:kurt 寫:完全唔明
Image -> LRGB Color Synthesis -> 揀mode揀file -> Apply
Software方面有機會出去影嘢就會用呢個.
誰在線上
正在瀏覽這個版面的使用者:沒有註冊會員 和 14 位訪客