YZ Cnc Chandra observing window delayed

Exoplanet occultation, asteroid occultation,
solar research, comet observation, astrometry, etc.
回覆文章
PTS
夸克星
文章: 17242
註冊時間: 週日 28 10月, 2007 08:50
來自: HK

YZ Cnc Chandra observing window delayed

文章 PTS » 週四 26 1月, 2017 06:50

AAVSO Special Notice #428

January 25, 2017

YZ Cnc Chandra observing window delayed

The beginning of the observing window for the Chandra TOO
observations of the SU UMa-type dwarf nova YZ Cnc that are the
focus of AAVSO Alert Notice 565 and AAVSO Special Notice #427
(https://www.aavso.org/aavso-special-notice-427) has been delayed.

Principal Investigator Dr. Christian Knigge (University of
Southampton) informs us that Chandra Mission Planning has informed
him that the beginning of the Chandra-observable window for YZ Cnc
has been delayed until 2017 February 5.

This means that the dense coverage requested earlier for YZ Cnc
does not need to begin until February 2. At that time, please
resume observing YZ Cnc closely (one to a few times, widely spaced,
per night) until further notice, possibly through the end of the
observing season. Your observations will be used to decide when to
trigger the TOO observations, so they are crucial.

As mentioned in the earlier notices, YZ Cnc has normal outbursts
about every 7-10 days, and superoutbursts about every 100-110 days.
The astronomers are planning to use a superoutburst to trigger the
TOO observations.

Observers will be informed when the Chandra observations have been
carried out and the campaign ends. Visual and V or CV band
observations are requested; other bands are welcome but are not
essential. Please report your observations to the AAVSO via WebObs
as soon after you make them as possible, especially if you see YZ
Cnc at visual magnitude 13.8 or brighter. Typical normal outbursts
reach visual magnitude ~12.0, and superoutbursts ~11.0-11.3. In
recent years at minimum YZ Cnc has been ~14.6-14.8.

Coordinates (2000.0): R.A. 08 10 56.65 Dec. +28 08 33.2

Charts: Charts with a comparison star sequence for YZ Cnc may be
created using the AAVSO Variable Star Plotter (VSP).

Please submit observations to the AAVSO International Database
using the name YZ CNC.

This campaign is being monitored on the AAVSO Observing Campaigns
webpage at https://www.aavso.org/observing-campaigns and is being
followed on the Campaigns and Observation Reports Forum at
https://www.aavso.org/content/yz-cnc-observing-campaign.

This AAVSO Special Notice was compiled by Elizabeth O. Waagen.

----------------------------------
SUBMIT OBSERVATIONS TO THE AAVSO

Information on submitting observations to the AAVSO may be found at:
https://www.aavso.org/webobs

SPECIAL NOTICE ARCHIVE AND SUBSCRIPTION INFORMATION

A Special Notice archive is available at the following URL:
https://www.aavso.org/special-notice-archive

Subscribing and Unsubscribing may be done at the following URL:
https://www.aavso.org/observation-notif ... ialnotices

-------------------------------------------------

回覆文章

回到「業餘天文研究專區 Amateur Astronomers' Research Area」

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 8 位訪客