AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

用 Raspberry Pi 設置一個輕便和便宜的 auto guider
回覆文章
頭像
mbike
主序星
文章: 197
註冊時間: 週日 21 3月, 2004 15:32
聯繫:

AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

文章 mbike » 週二 11 12月, 2018 07:35

Thanks to the effort made by QK Sampson, AstroEx3 was upgraded from AstroEx2. AstroEx2 and AstroEx3 can control most Nikon and Canon Cameras (except my EOS M3). On AstroEx2 version, I modified some gphoto2 comands so my Canon EOS M3 can be operated.
AstroEx 3.3 was modified for controlling M3 and 450D.

Download AstroEx ver3.3 for EOS-M3 請使用 8G Class 10 或以上 SD card 燒錄
The image can be downloaded at:

https://drive.google.com/open?id=1FOLzV ... mC2o1bGTtR.
This image was working properly on raspberry pi Pi 3B+. Please notify us if your model of Canon EOS M works properly on this version.

Since I did not modified any web pages and scripts for previous workable Nikon and Canon models, this image shall be worked for them.

New feature:
Time lapse with time delay. Please set the camera in shutter speed other than bulb.

Limitation:
ISO cannot be set from AstroEX (gphoto2 --set-config ISO=XXX did not work). You have to set via buttons of EOS-M cameras.
Shall only support EOS M10, M100, M2, M3, M5, M50, M6 (http://gphoto.org/proj/libgphoto2/support.php), but the image was tested with my M3 only.

Changes / Upgraded:
  • web interface for EOS M3 and 450D;
    ligphoto2: 2.5.22.
Amendment files https://drive.google.com/open?id=1W4xVs ... bBVdpMZlh4 & script file for update https://drive.google.com/open?id=1Fmyb- ... DxsYKVoF1o
Hyperlink and wordings to web control for "preview capture of Canon M3" was added to index.php and gps.php.
"Upgrade gphoto2" script under other menu.

gphoto2 command for proper operations of EOS M3:
At least 2 second delay shall added after the gphoto2 command: gphoto2 --wait-event=2s
At least 4 second delay shall added after the --capture-image-and-download command: gphoto2 ... --capture-image-and-download=4s
astroexm3.png
AstroEx 3 for Canon EOS M. gphoto2 version.
astroexm3.png (381.86 KiB) 已瀏覽 4891 次
Screenshot_2018-12-08-20-43-32.png
index.php
Screenshot_2018-12-08-20-43-32.png (130.34 KiB) 已瀏覽 4891 次
Screenshot_2018-12-08-20-44-17.png
gps.php
Screenshot_2018-12-08-20-44-17.png (134.25 KiB) 已瀏覽 4891 次
Screenshot_2018-12-08-20-44-50.png
capture preview for EOS M3, timelapse capture hyperlink
Screenshot_2018-12-08-20-44-50.png (119.57 KiB) 已瀏覽 4891 次
Screenshot_2018-12-08-20-45-10.png
capture preview for EOS M3, timelapse capture hyperlink
Screenshot_2018-12-08-20-45-10.png (146.3 KiB) 已瀏覽 4891 次
Screenshot_2018-12-08-20-51-05.png
Timelapse capture
Screenshot_2018-12-08-20-51-05.png (171.86 KiB) 已瀏覽 4891 次
Screenshot_2018-12-08-20-52-47.png
Timelapse process log
Screenshot_2018-12-08-20-52-47.png (220.29 KiB) 已瀏覽 4891 次
Screenshot_2018-12-08-20-54-00.png
Timelapse folder
Screenshot_2018-12-08-20-54-00.png (183.55 KiB) 已瀏覽 4891 次
Screenshot_2018-12-08-21-36-47.png
Astrophoto capture
Screenshot_2018-12-08-21-36-47.png (113.27 KiB) 已瀏覽 4891 次
Screenshot_2018-12-08-21-36-58.png
Astrophoto capture
Screenshot_2018-12-08-21-36-58.png (126.99 KiB) 已瀏覽 4891 次
最後由 mbike 於 週二 19 2月, 2019 20:02 編輯,總共編輯了 1 次。

頭像
mbike
主序星
文章: 197
註冊時間: 週日 21 3月, 2004 15:32
聯繫:

Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

文章 mbike » 週三 12 12月, 2018 14:03

Some files were modified for Canon EOS 450D. The kernel was upgraded to 4.14.87-v7. The new image is available for download.


astroex 450d.png
EOS 450D operation
astroex 450d.png (275.81 KiB) 已瀏覽 4794 次

astroex kernel 41487v7.png
kernel was upgraded
astroex kernel 41487v7.png (396.85 KiB) 已瀏覽 4794 次

sampson
紅巨星
文章: 404
註冊時間: 週二 16 7月, 2013 20:31

Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

文章 sampson » 週四 13 12月, 2018 23:15

[Good Job]

頭像
universe24
中子星
文章: 1930
註冊時間: 週五 11 7月, 2003 20:11
來自: Malaysia

Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

文章 universe24 » 週五 14 12月, 2018 09:30

太犀利了! [想入非非]

大黃傻貓GARFIELD
中子星
文章: 1692
註冊時間: 週日 11 9月, 2005 01:34

Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

文章 大黃傻貓GARFIELD » 週五 14 12月, 2018 10:51

感動.....

頭像
mbike
主序星
文章: 197
註冊時間: 週日 21 3月, 2004 15:32
聯繫:

Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

文章 mbike » 週五 14 12月, 2018 21:58

mbike 寫:
週二 11 12月, 2018 07:35
ligphoto2: 2.5.19 (M3 did not capture image properly via web control for version 2.5.20, 2.5.21 and development version);
The main developer, Marcus Meissner replied:

"There was a bug I introduced in git... I fixed it in libgphoto2 git, it will be in 2.5.22.

Ciao, Marcus"

Once the bug is fixed, I shall burn a new image file for download.

頭像
mbike
主序星
文章: 197
註冊時間: 週日 21 3月, 2004 15:32
聯繫:

Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

文章 mbike » 週二 19 2月, 2019 20:15

AstroEx 3.3 被修改用於控制M3和450D。

請在第一頁下載圖像文件。 這圖像文件在樹莓Pi 3B 和 3B +上正常工作。

局限性:
無法從AstroEX設置ISO(gphoto2 --set-config ISO = XXX不起作用)。 您必須通過EOS-M攝像機的按鈕進行設置。
應該只支持EOS M10,M100,M2,M3,M5,M50,M6( http://gphoto.org/proj/libgphoto2/support.php ),但是eos-m的AstroEx 3.3 僅用我的M3測試過。

從AstroEx 3.3更改/升級:
1. web interface for EOS M3 and 450D;
2. Time lapse with time delay;
3. ligphoto2: 2.5.22.

AstroEx 3.3 was modified for controlling M3 and 450D.

Please download the image file on the first page. This image was working properly on raspberry Pi 3B and 3B+.

Limitation:
ISO cannot be set from AstroEX (gphoto2 --set-config ISO=XXX did not work). You have to set via buttons of EOS-M cameras.
Shall only support EOS M10, M100, M2, M3, M5, M50, M6 (http://gphoto.org/proj/libgphoto2/support.php), but the AstroEx 3.3 for eos-m was tested with my M3 only.

Changes / Upgraded from AstroEx 3.3:
1. web interface for EOS M3 and 450D;
2. Time lapse with time delay;
3. ligphoto2: 2.5.22.

sampson
紅巨星
文章: 404
註冊時間: 週二 16 7月, 2013 20:31

Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

文章 sampson » 週二 19 2月, 2019 21:41

[Good Job] [Good Job]

頭像
universe24
中子星
文章: 1930
註冊時間: 週五 11 7月, 2003 20:11
來自: Malaysia

Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

文章 universe24 » 週三 20 2月, 2019 11:21

按理说来,能支持 450D,其他同个系列的型号也应该会支持吧?
还是说连接过后,系统会辨识是否450D?

頭像
Eddy So
夸克星
文章: 16057
註冊時間: 週四 04 12月, 2008 22:35
來自: 中男海

Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

文章 Eddy So » 週三 20 2月, 2019 19:46

[Good Job]

頭像
mbike
主序星
文章: 197
註冊時間: 週日 21 3月, 2004 15:32
聯繫:

Re: AstroEx 3 for Canon EOS M and 450D cameras (Pi 3B / 3B+)

文章 mbike » 週四 21 2月, 2019 09:37

universe24 寫:
週三 20 2月, 2019 11:21
按理说来,能支持 450D,其他同个系列的型号也应该会支持吧?
还是说连接过后,系统会辨识是否450D?
我發覺450d的commands,與其他較新型號的canon DSLR 相機不相同,先前的 web page 已經能夠控製到大部分Canon 相機,只是eos-m和部分型號例如450d需要不同的控制command.

回覆文章

回到「Raspberry Pi 自動導星裝置 diy Autoguiding」

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 8 位訪客