Philips SPC900NC

Celestron Meade Vixen Takahashi Astrophysics
Sbig CCD ToUcam Coronado Filter Nikon Canon
<br> 目鏡 ED折射鏡 反射鏡 折反射鏡 太陽望遠鏡 鑢鏡 相機 鏡頭
回覆文章
Tan14
原恆星
文章: 117
註冊時間: 週三 06 8月, 2003 03:03
來自: Tai Po
聯繫:

Philips SPC900NC

文章 Tan14 » 週二 26 2月, 2008 01:11

請問點樣設定呢隻野capture格式為 AVI ?
我 capture D 片全為 MPG ??

Thanks!

頭像
Subaru
夸克星
文章: 6693
註冊時間: 週三 02 7月, 2003 19:27

文章 Subaru » 週二 26 2月, 2008 01:28

用Philips bundle果隻software Vrecord, 一定係avi, 無得揀其他format嫁喎.

Tan14
原恆星
文章: 117
註冊時間: 週三 06 8月, 2003 03:03
來自: Tai Po
聯繫:

文章 Tan14 » 週二 26 2月, 2008 02:44

Couldn't find any video format setting ...
附加檔案
MPG.JPG
MPG.JPG (40.06 KiB) 已瀏覽 5962 次

頭像
Subaru
夸克星
文章: 6693
註冊時間: 週三 02 7月, 2003 19:27

文章 Subaru » 週二 26 2月, 2008 08:03

原來我重用緊隻v1.3 driver, 遲d等我d/l隻新driver試吓先.

頭像
Wah!!
夸克星
文章: 13283
註冊時間: 週一 15 3月, 2004 21:28
聯繫:

文章 Wah!! » 週二 26 2月, 2008 08:56

係唔係用 K3CCDTools 都會出 mpg 架?

Tan14
原恆星
文章: 117
註冊時間: 週三 06 8月, 2003 03:03
來自: Tai Po
聯繫:

文章 Tan14 » 週二 26 2月, 2008 11:31

Subaru, are you using capture software bundled with PCVC840K on SPC900NC cam (changed the 900NC cam firmware to 840K)?

The software shown on my captured screen is come with SPC900NC.

頭像
Subaru
夸克星
文章: 6693
註冊時間: 週三 02 7月, 2003 19:27

文章 Subaru » 週二 26 2月, 2008 21:45

Actually, I upgraded the firmware of my 740K to SPC900NC.

With 1 computer, I use the bundled software VRecord for the 740K, and it works with my 'SPC900NC' and records the stream as avi.

And then I installed the SPC900NC software into another computer running Vista, and now this new software VLounge just records the stream into mpg without any other choice. I guess Philips just use the mpg in their latest software to reduce the disk space needed.

I would recommend you to download the 840K software here: http://www.p4c.philips.com/cgi-bin/dcbi ... k_Software and try to see if the stream is now recorded as avi with the previous version software.

Now, with the DFK camera, I seldom use the ToUcam, and this is the 1st time I experiment and discover this matter.

Tan14
原恆星
文章: 117
註冊時間: 週三 06 8月, 2003 03:03
來自: Tai Po
聯繫:

文章 Tan14 » 週三 27 2月, 2008 00:30

As 840K software doesn't recognize 900NC webcam, I will install the 840K firmware into the 900NC webcam and see if it works with 840K software.

頭像
Subaru
夸克星
文章: 6693
註冊時間: 週三 02 7月, 2003 19:27

文章 Subaru » 週三 27 2月, 2008 00:53

Tan14 寫:As 840K software doesn't recognize 900NC webcam, I will install the 840K firmware into the 900NC webcam and see if it works with 840K software.
Oh. My 740K is recognized as 900NC after the firmware upgrade, and the 840K software can run on my upgraded 740K.

My understanding is the hardware of 740K, 840K and 900NC are nearly the same except the CCD of the 900NC is a newer version but with the same functionality.

Tan14
原恆星
文章: 117
註冊時間: 週三 06 8月, 2003 03:03
來自: Tai Po
聯繫:

文章 Tan14 » 週三 27 2月, 2008 22:57

No need to change 900NC firmware. Just install 900NC driver only and 840K bundle software, then run "VRecord" and that's it. White balance, gain, etc..... can still be manually adjusted :)

回覆文章

回到「廠製儀器 Factory Equipment」

誰在線上

正在瀏覽這個版面的使用者:Google [Bot] 和 5 位訪客