想问下电跟的一个基本问题
想问下电跟的一个基本问题
突然看到呢个thread想问下电跟的一个基本问题,马达机组只是用来转动个mount,但问题怎样确定转动的速度才刚刚好和地球的转动一致呢? 又如何知道地球的转动速度呢: 如果地球转动速度不能得知,又如何定马达的速度呢 ?
Split from:
http://www.hkastroforum.net/viewtopic.php?t=16315
by Wah!
Split from:
http://www.hkastroforum.net/viewtopic.php?t=16315
by Wah!
- PeterPeter
- 夸克星
- 文章: 2653
- 註冊時間: 週四 30 11月, 2006 13:25
地球大約用一天的時間转动一圈,即360度.
所以每一分鐘轉1/4度(360度/24小時x60分鐘).
要追蹤天上星星,就要使攝影台 (例如: Wong Sir的天文攝影入門內的...
http://www.hkastroforum.net/album_pic.php?pic_id=371 )
沿著極軸每一分鐘轉1/4度.
所以每一分鐘轉1/4度(360度/24小時x60分鐘).
要追蹤天上星星,就要使攝影台 (例如: Wong Sir的天文攝影入門內的...
http://www.hkastroforum.net/album_pic.php?pic_id=371 )
沿著極軸每一分鐘轉1/4度.
Hi,PeterPeter 寫:地球大約用一天的時間转动一圈,即360度.
所以每一分鐘轉1/4度(360度/24小時x60分鐘).
要追蹤天上星星,就要使攝影台 (例如: Wong Sir的天文攝影入門內的...
http://www.hkastroforum.net/album_pic.php?pic_id=371 )
沿著極軸每一分鐘轉1/4度.
1/1440 rpm is the rate for solar observation. For stars, it is about 1/1436 rpm.
This is the difference between solar day and sidereal dsy.
PTS
可先參考教學文章 2.3 節:MANDII 寫:wha 兄,我又5明多口问一下了。
跟踪还要考虑扭螺絲的频率的吗?
你说的是手动还是电动的呢?
如果是手动扭螺絲跟踪,那么是肉眼边看镜头边扭螺絲的吧,只要眼看到星点有移位便要扭制的吧,那样不存在固定的每分或每秒的动制频率吧。
如果是电动,那么市面上卖的电跟又如何知道你的镜子的性质来定它的扭动速度或者扭动频率呢?如果市面的电跟在不用得知镜子性质的情况底下能够實现跟踪,那么也说明与镜子本身无任何关系吧,并且都是同一个速度和地球同步的吧,短焦长焦都无关吧 。
http://www.hkastroforum.net/viewtopic.php?t=778
Hi,MANDII 寫:wha 兄,我又5明多口问一下了。
跟踪还要考虑扭螺絲的频率的吗?
你说的是手动还是电动的呢?
如果是手动扭螺絲跟踪,那么是肉眼边看镜头边扭螺絲的吧,只要眼看到星点有移位便要扭制的吧,那样不存在固定的每分或每秒的动制频率吧。
如果是电动,那么市面上卖的电跟又如何知道你的镜子的性质来定它的扭动速度或者扭动频率呢?如果市面的电跟在不用得知镜子性质的情况底下能够實现跟踪,那么也说明与镜子本身无任何关系吧,并且都是同一个速度和地球同步的吧,短焦长焦都无关吧 。
Wah is right.
Depending on the focal length of the lens and the pixel size of your ccd, you can actually calculate the time required for the star image to move across 2 pixels. This time is the interval for you to move the drive by the same amount to the west, thus keeping the star image to stay within the 2 pixels, equivalent to a good tracking.
PTS
PTS 寫:Hi,MANDII 寫:wha 兄,我又5明多口问一下了。
跟踪还要考虑扭螺絲的频率的吗?
你说的是手动还是电动的呢?
如果是手动扭螺絲跟踪,那么是肉眼边看镜头边扭螺絲的吧,只要眼看到星点有移位便要扭制的吧,那样不存在固定的每分或每秒的动制频率吧。
如果是电动,那么市面上卖的电跟又如何知道你的镜子的性质来定它的扭动速度或者扭动频率呢?如果市面的电跟在不用得知镜子性质的情况底下能够實现跟踪,那么也说明与镜子本身无任何关系吧,并且都是同一个速度和地球同步的吧,短焦长焦都无关吧 。
Wah is right.
Depending on the focal length of the lens and the pixel size of your ccd, you can actually calculate the time required for the star image to move across 2 pixels. This time is the interval for you to move the drive by the same amount to the west, thus keeping the star image to stay within the 2 pixels, equivalent to a good tracking.
PTS
Hello PTS ,
I just have a simple question to ask you .
How do the mount know your scope focal length or CCD to set it's speed to track the star correctly ? You know there is many different scope and CCD and mount , Or should I each time need to manually set the speed of my mount to fit my scope or CCD ?
最後由 MANDII 於 週三 30 9月, 2009 12:38 編輯,總共編輯了 1 次。
For any situation, average tracking SPEED are the same.
But the same average speed can have different ACCURACY.
e.g.
1. Turning screw 360 degrees every 1 min
2. Turning screw 180 degrees every 30 sec
3. Turning screw 90 degrees every 15 sec
4. Turning screw 6 degrees every 1 sec
But the same average speed can have different ACCURACY.
e.g.
1. Turning screw 360 degrees every 1 min
2. Turning screw 180 degrees every 30 sec
3. Turning screw 90 degrees every 15 sec
4. Turning screw 6 degrees every 1 sec
最後由 Wah!! 於 週三 30 9月, 2009 12:09 編輯,總共編輯了 1 次。
誰在線上
正在瀏覽這個版面的使用者:沒有註冊會員 和 11 位訪客