我的12.5"反射鏡

自製天文儀器 望遠鏡腳架 赤道儀 杜蘇式<br> 開放式衍架式 鏡筒 望遠鏡配件 主鏡座 副鏡座
蔡sir
白矮星
文章: 655
註冊時間: 週日 27 7月, 2003 22:06

我的12.5"反射鏡

文章 蔡sir » 週日 07 5月, 2006 22:52

前後花了年多的時間,終於在勞動節總裝完成!
附加檔案
IMG_01.JPG
金輪法王?
IMG_01.JPG (114.82 KiB) 已瀏覽 16192 次
IMG_02.JPG
IMG_02.JPG (126.46 KiB) 已瀏覽 16192 次
IMG_04.JPG
IMG_04.JPG (36.32 KiB) 已瀏覽 16192 次
IMG_07.JPG
IMG_07.JPG (289.88 KiB) 已瀏覽 16192 次
總裝_01.JPG
總裝_01.JPG (42.51 KiB) 已瀏覽 16192 次
最後由 蔡sir 於 週一 08 5月, 2006 01:10 編輯,總共編輯了 2 次。

BJDF
主序星
文章: 143
註冊時間: 週日 26 2月, 2006 10:52
來自: 北京

文章 BJDF » 週日 07 5月, 2006 23:04

鏡子有多厚?

頭像
Tarepanda
夸克星
文章: 9321
註冊時間: 週一 08 11月, 2004 13:28
來自: 香港

文章 Tarepanda » 週日 07 5月, 2006 23:59

全金屬,簡潔漂亮
蔡SIR的風格
不知有多重呢

蔡sir
白矮星
文章: 655
註冊時間: 週日 27 7月, 2003 22:06

文章 蔡sir » 週一 08 5月, 2006 00:38

沒法子,為了省錢、減重,只有土法上馬,幾乎所有部件都是由鋁板、鋁管、鋁角,鋁槽,用鑽床土法加工而成。
鏡厚2英吋,焦比F/6,淨重10kg,鏡筒採用Serrurier truss開放桁架式結構,加上其他配件如螺絲、拉釘,尋星鏡架等,總重量接近27kg。

蔡sir
白矮星
文章: 655
註冊時間: 週日 27 7月, 2003 22:06

文章 蔡sir » 週一 08 5月, 2006 01:03

這面鏡是我多年前從美國訂購,保證精度好像是1/10波長?價錢倒是記不起了,質料為Pyrex玻璃。鏡坯價錢跟成品差不太遠,最重要的是:以前香港鍍不到保護膜。
同時因為那個時候在家裏根本就不可能磨鏡,只要一開工,到處都是砂,聲如雷鳴,不被人斬死才怪!

頭像
Tarepanda
夸克星
文章: 9321
註冊時間: 週一 08 11月, 2004 13:28
來自: 香港

文章 Tarepanda » 週一 08 5月, 2006 04:43

那看來鏡子保存的很好,反射面很漂亮,2寸也真夠厚的,不知道XR250那塊是否也是2寸,不知道何時才能用它一睹行星,相信一定很漂亮,因為農莊Subaru的那支8寸反射已經沒得頂了

頭像
daniel cck
夸克星
文章: 2343
註冊時間: 週二 15 7月, 2003 05:06
來自: HK
聯繫:

文章 daniel cck » 週一 08 5月, 2006 05:36

恭喜!恭喜!

Chanlunlun
夸克星
文章: 3847
註冊時間: 週四 09 10月, 2003 21:06

文章 Chanlunlun » 週一 08 5月, 2006 08:27

Tarepanda 寫:那看來鏡子保存的很好,反射面很漂亮,2寸也真夠厚的,不知道XR250那塊是否也是2寸,不知道何時才能用它一睹行星,相信一定很漂亮,因為農莊Subaru的那支8寸反射已經沒得頂了
Dear Mr. Panda,

The telescope just looks so professional and our telesopes are just dwarfted by such beautifully crafted equipment.

I owned a 12.5 inch 2 inch thick pyrex mirror once and the mirror came from Edmund. I uased it to viewed deep sky objects and planets. My feeling is that with for such a huge thickness it is quite impossible for the mirror to attain thermal equilibrium within a resonable time. There was always turbulance obseving high power inside the eyepiece.

The mirror is very heavy, at 10 kg and with accessories fitted the whole telescope can easily reach a total weight of nearly 50 lbs, heavier than our 30 inch mirror blank.

If the telescope is not intended for outdoor usage (like ours !! ) then this impressively crafted telescope will be a great equipment for astronomy.

Best regards
Chan Yuk Lun

TONGKW
中子星
文章: 1956
註冊時間: 週二 13 9月, 2005 14:35
來自: Hong Kong

文章 TONGKW » 週一 08 5月, 2006 10:13

我考慮遲些自裝一台 10吋或12吋口徑的牛頓鏡,有個問題想請教各位,這套主鏡用上了 6 個夾子來固定,會不會產生更多來自主鏡夾子的繞射 (mirror clip diffraction),加上繞射來自副鏡支架 (spider vane diffraction),在高倍目視觀測時有沒有影響。
不幸大口徑的主鏡通常都很重,不知道再有沒有其他辦法來固定主鏡及防止在搬動時移位。

Chanlunlun
夸克星
文章: 3847
註冊時間: 週四 09 10月, 2003 21:06

文章 Chanlunlun » 週一 08 5月, 2006 10:57

TONGKW 寫:我考慮遲些自裝一台 10吋或12吋口徑的牛頓鏡,有個問題想請教各位,這套主鏡用上了 6 個夾子來固定,會不會產生更多來自主鏡夾子的繞射 (mirror clip diffraction),加上繞射來自副鏡支架 (spider vane diffraction),在高倍目視觀測時有沒有影響。
不幸大口徑的主鏡通常都很重,不知道再有沒有其他辦法來固定主鏡及防止在搬動時移位。
Dear Mr. Tong,

Why use clips? I advice using double sided gluing tapes to fix the mirror onto a flat baseplate. You will solve all problems all at once.

Best regards
Chan Yuk Lun

akltsang
紅巨星
文章: 584
註冊時間: 週六 16 8月, 2003 13:37

文章 akltsang » 週一 08 5月, 2006 11:48

I have a question about the main mirror cell.

When doing collimation, there may be a need to adjust the mirror slightly along the x-axis and y-axis, so that the centres of the main mirror and secondary mirror will be matched.

What is the mechanism of achieving these adjustments in a dob? (I am making a dob and this is one of my problems encountered.)

It will be best if some pictures/charts illustrating the structure of the main mirror cell can be provided.

Thanks a lot.

Chanlunlun
夸克星
文章: 3847
註冊時間: 週四 09 10月, 2003 21:06

文章 Chanlunlun » 週一 08 5月, 2006 12:09

akltsang 寫:I have a question about the main mirror cell.

When doing collimation, there may be a need to adjust the mirror slightly along the x-axis and y-axis, so that the centres of the main mirror and secondary mirror will be matched.

What is the mechanism of achieving these adjustments in a dob? (I am making a dob and this is one of my problems encountered.)

It will be best if some pictures/charts illustrating the structure of the main mirror cell can be provided.

Thanks a lot.
Dear Mr. Kmng,

There is no centers for a flat secondary diagonal mirror. All you need to do is to adjust the tilt of the primary so that its optical axis just passes through the center of eyepiece.

The best possible mechanism for you to reference to is the BOSMA 3 inch reflector ( or any other brand ). Buy one ( at HKD 200 or so ) at Ap Liu street and dismantle it and you will find what you need to do.

Best regards
Chan Yuk Lun

頭像
XR250
夸克星
文章: 6513
註冊時間: 週一 13 12月, 2004 09:43
來自: NT

文章 XR250 » 週一 08 5月, 2006 12:39

恭喜,恭喜。又一枝新鏡落成。

To Panda,我塊主鏡都係12.5" F6 Pyrex 玻璃,不過只願1.25"厚。
希望下個月可以裝好,今年秋天會安置在西涌。

頭像
Tarepanda
夸克星
文章: 9321
註冊時間: 週一 08 11月, 2004 13:28
來自: 香港

文章 Tarepanda » 週一 08 5月, 2006 13:46

Chanlunlun 寫:
TONGKW 寫:我考慮遲些自裝一台 10吋或12吋口徑的牛頓鏡,有個問題想請教各位,這套主鏡用上了 6 個夾子來固定,會不會產生更多來自主鏡夾子的繞射 (mirror clip diffraction),加上繞射來自副鏡支架 (spider vane diffraction),在高倍目視觀測時有沒有影響。
不幸大口徑的主鏡通常都很重,不知道再有沒有其他辦法來固定主鏡及防止在搬動時移位。
Dear Mr. Tong,

Why use clips? I advice using double sided gluing tapes to fix the mirror onto a flat baseplate. You will solve all problems all at once.

Best regards
Chan Yuk Lun
我也有同樣問題,我打算用多塊強力雙面膠,磨鏡班用的那種,用它來固定主鏡,不想用夾住的方法固定主鏡,畢竟8寸的玻璃不算重,

頭像
Tarepanda
夸克星
文章: 9321
註冊時間: 週一 08 11月, 2004 13:28
來自: 香港

文章 Tarepanda » 週一 08 5月, 2006 13:48

XR250 寫:恭喜,恭喜。又一枝新鏡落成。

To Panda,我塊主鏡都係12.5" F6 Pyrex 玻璃,不過只願1.25"厚。
希望下個月可以裝好,今年秋天會安置在西涌。
那真的不厚
不打算用它上mount?

回覆文章

回到「自製天文儀器 diy Astro Equipment」

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 10 位訪客