Making of 16 inch PTC telescope - 3, #1200 finished

自製天文望遠鏡 牛頓望遠鏡 杜蘇式 卡式 設計和磨鏡方法<br>
佛科試鏡法 佛科刀片儀 光柵試鏡法 光柵片
回覆文章
Chanlunlun
夸克星
文章: 3847
註冊時間: 週四 09 10月, 2003 21:06

Making of 16 inch PTC telescope - 3, #1200 finished

文章 Chanlunlun » 週三 24 6月, 2009 22:42

Dear ATMers,

Today I worked at turbo speed. I finished #320, #600 and #1200 grits all in one day, leaving a good and smooth surface to be polished.

I grind every grit for a period of 90 minutes except for the #1200, which lasted for 120 minutes.

Fortunately the temperature today was not as high as before and my work could be taken place in a more comfortable way. By the word “comfortable” I mean in a relative sense – I still had to work under a lot of sweat !

The final measurement of the mirror showed that it has a f/ratio of 4.6, not far away from the designed value.

Best regards
Chan Yuk Lun
24 June 2009
附加檔案
04.jpg
After #1200 grinding the mirror start to reflect at grazing angle.
04.jpg (65.16 KiB) 已瀏覽 6810 次

anyone
夸克星
文章: 14338
註冊時間: 週六 07 2月, 2009 12:13
來自: hong kong

文章 anyone » 週三 24 6月, 2009 22:47

鏡神, 我佩服到五體投地! 勁 ! :shock:

頭像
funoooo
夸克星
文章: 7831
註冊時間: 週五 30 6月, 2006 16:34
聯繫:

文章 funoooo » 週三 24 6月, 2009 22:52

嘩然! 這麼快速. :shock:

真利害. [Good Job]

頭像
SiuSiu
中子星
文章: 1206
註冊時間: 週三 03 5月, 2006 19:53
來自: Milky Way
聯繫:

文章 SiuSiu » 週三 24 6月, 2009 22:54

:shock: 利害。。。果然鏡神! :o

頭像
opa
夸克星
文章: 2254
註冊時間: 週四 09 9月, 2004 00:06
來自: HK

文章 opa » 週三 24 6月, 2009 22:56

點解鏡神出品 d 鏡片都可以咁 "輕薄" 既??
我見一般 16" lens cell 都有 1.6" 至 2" 厚左右.
最後由 opa 於 週三 24 6月, 2009 23:03 編輯,總共編輯了 1 次。

Chanlunlun
夸克星
文章: 3847
註冊時間: 週四 09 10月, 2003 21:06

文章 Chanlunlun » 週三 24 6月, 2009 23:01

opa 寫:點解鏡神出品 d 鏡片都可以咁 "輕薄" 既??
Dear Mr. APO,

This is because thin mirror blank is cheap and light weighted. This is a must for poor man's portable telescope.

Best regards
Chan Yuk Lun

頭像
opa
夸克星
文章: 2254
註冊時間: 週四 09 9月, 2004 00:06
來自: HK

文章 opa » 週三 24 6月, 2009 23:05

Chanlunlun 寫:
opa 寫:點解鏡神出品 d 鏡片都可以咁 "輕薄" 既??
Dear Mr. APO,

This is because thin mirror blank is cheap and light weighted. This is a must for poor man's portable telescope.

Best regards
Chan Yuk Lun
身為鏡神都話 poor man.....
Design for portability 解釋比較合理..

To: bingsze sir, 似乎呢個討論區除左中文有問題, 英文用詞都要 review 下...

頭像
Nosneb
夸克星
文章: 2814
註冊時間: 週五 12 5月, 2006 13:31
來自: 中華人民共和國 香港特別行政區

文章 Nosneb » 週三 24 6月, 2009 23:15

:shock: :shock: :shock: 有冇快得咁離譜!! 尋日先至話finish180# 今日就己經連1200#都搞掂埋~ 勁!!!!!!!!!!!!!!! 不愧為鏡~~~~神~~~~

頭像
funoooo
夸克星
文章: 7831
註冊時間: 週五 30 6月, 2006 16:34
聯繫:

文章 funoooo » 週三 24 6月, 2009 23:19

opa 寫:
Chanlunlun 寫:
opa 寫:點解鏡神出品 d 鏡片都可以咁 "輕薄" 既??
Dear Mr. APO,

This is because thin mirror blank is cheap and light weighted. This is a must for poor man's portable telescope.

Best regards
Chan Yuk Lun
身為鏡神都話 poor man.....
Design for portability 解釋比較合理..

To: bingsze sir, 似乎呢個討論區除左中文有問題, 英文用詞都要 review 下...
又來啦! 放過 bingsze 兄.
話時話, opa 兄你好像未覆我. [交出來]

頭像
opa
夸克星
文章: 2254
註冊時間: 週四 09 9月, 2004 00:06
來自: HK

文章 opa » 週三 24 6月, 2009 23:24

funoooo 寫:
opa 寫:
Chanlunlun 寫:
opa 寫:點解鏡神出品 d 鏡片都可以咁 "輕薄" 既??
Dear Mr. APO,

This is because thin mirror blank is cheap and light weighted. This is a must for poor man's portable telescope.

Best regards
Chan Yuk Lun
身為鏡神都話 poor man.....
Design for portability 解釋比較合理..

To: bingsze sir, 似乎呢個討論區除左中文有問題, 英文用詞都要 review 下...
又來啦! 放過 bingsze 兄.
話時話, opa 兄你好像未覆我. [交出來]
咦?? 我爭你野咩??? 睇下 pm 先..

頭像
bingsze
夸克星
文章: 3939
註冊時間: 週一 15 1月, 2007 18:13
來自: hong kong

文章 bingsze » 週四 25 6月, 2009 08:32

opa 寫:
Chanlunlun 寫:
opa 寫:點解鏡神出品 d 鏡片都可以咁 "輕薄" 既??
Dear Mr. APO,

This is because thin mirror blank is cheap and light weighted. This is a must for poor man's portable telescope.

Best regards
Chan Yuk Lun
身為鏡神都話 poor man.....
Design for portability 解釋比較合理..

To: bingsze sir, 似乎呢個討論區除左中文有問題, 英文用詞都要 review 下...
其實這個討論區十分多勁人,他們一般都很謙虛有禮,樂意分享,這個也是我喜歡上這裡的一個原因! :D

頭像
Wah!!
夸克星
文章: 13283
註冊時間: 週一 15 3月, 2004 21:28
聯繫:

文章 Wah!! » 週四 25 6月, 2009 09:40

鏡神一個星期磨好一塊鏡, 不如一口氣磨多幾塊, 送俾大家用啦!
又係度發緊夢...... [貴夫人-圖] [貴夫人-圖] [貴夫人-圖]

P.S. 鏡神請收pm ;)

回覆文章

回到「自製天文望遠鏡 Amateur Telescope Making 」

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 19 位訪客