Making of 16 inch PTC telescope - 4, Polishing finished.

自製天文望遠鏡 牛頓望遠鏡 杜蘇式 卡式 設計和磨鏡方法<br>
佛科試鏡法 佛科刀片儀 光柵試鏡法 光柵片
Chanlunlun
夸克星
文章: 3847
註冊時間: 週四 09 10月, 2003 21:06

Making of 16 inch PTC telescope - 4, Polishing finished.

文章 Chanlunlun » 週四 25 6月, 2009 22:57

Dear ATMers,

Today was an extreme busy day for me. After spending long time pouring the pitch lap ( it is not at all easy to pour a 16 inch full size pitch lap ) the polishing of the mirror was started right away.

In order to save time I managed to get a full polish of the mirror within the same day. After 6 working hour the mirror got 99% polished. Under examination by an 12 mm eyepiece there were still some small pit sparsely populated at central portion of the mirror. They presented no problem of course, for the remaining figuring and parabolization stage will get these pits polished out at the same time.

The mirror had not been tested yet. It was unfortunate that when the polishing was done it was already late in the evening and the laboratory was closed. Testing of mirror will be done on tomorrow morning.

Hopefully the profile of the mirror will not be too terrible.

Best regards
Chan Yuk Lun
25 June 2009
附加檔案
06.jpg
Polishing done.
06.jpg (90.23 KiB) 已瀏覽 6517 次
05.jpg
Hot pressing the 16 inches full size pitch lap
05.jpg (78.75 KiB) 已瀏覽 6517 次

anyone
夸克星
文章: 14338
註冊時間: 週六 07 2月, 2009 12:13
來自: hong kong

文章 anyone » 週四 25 6月, 2009 23:10

:shock: 鏡神之名, 當之無愧! 勁!

頭像
funoooo
夸克星
文章: 7831
註冊時間: 週五 30 6月, 2006 16:34
聯繫:

文章 funoooo » 週四 25 6月, 2009 23:54

[Good Job]

頭像
Lam Chi Wah
原恆星
文章: 84
註冊時間: 週四 29 5月, 2008 17:31
來自: Hong Kong

文章 Lam Chi Wah » 週五 26 6月, 2009 00:06

the mirror looks very beautiful.

頭像
Eddy So
夸克星
文章: 16078
註冊時間: 週四 04 12月, 2008 22:35
來自: 中男海

文章 Eddy So » 週五 26 6月, 2009 01:02

專家制作 [Good Job]

頭像
SiuSiu
中子星
文章: 1206
註冊時間: 週三 03 5月, 2006 19:53
來自: Milky Way
聯繫:

文章 SiuSiu » 週五 26 6月, 2009 01:24

好快既進度,期待~~ :)

Chanlunlun
夸克星
文章: 3847
註冊時間: 週四 09 10月, 2003 21:06

文章 Chanlunlun » 週五 26 6月, 2009 08:35

Lam Chi Wah 寫:the mirror looks very beautiful.
Dear Mr. Lam,

Yes indeed.

A well polished mirror always looks pretty but don't be deceived by appearance. We must put the mirror into test before we are sure whether it's good or not.

Best regards
Chan Yuk Lun

頭像
funoooo
夸克星
文章: 7831
註冊時間: 週五 30 6月, 2006 16:34
聯繫:

文章 funoooo » 週五 26 6月, 2009 12:14

鏡神就是鏡神!
不用幾日已拋光。利害! 利害! [Good Job] [Good Job] [Good Job]

BossKwan
中子星
文章: 1254
註冊時間: 週五 01 10月, 2004 03:07

文章 BossKwan » 週五 26 6月, 2009 16:31

簡直係: SUPER SPEED and SUPER-MAN

syyuen168
夸克星
文章: 3856
註冊時間: 週五 06 7月, 2007 23:06

文章 syyuen168 » 週五 26 6月, 2009 16:38

I worship the god of mirror. I think he should write a book on telescopes based on his experiences. [Good Job]

anyone
夸克星
文章: 14338
註冊時間: 週六 07 2月, 2009 12:13
來自: hong kong

文章 anyone » 週五 26 6月, 2009 16:58

syyuen168 寫:I worship the god of mirror. I think he should write a book on telescopes based on his experiences. [Good Job]
i would buy the book at the first time if he did ! :D

BossKwan
中子星
文章: 1254
註冊時間: 週五 01 10月, 2004 03:07

文章 BossKwan » 週五 26 6月, 2009 18:57

Dear MG,

Where did you get the glasses ?

頭像
Lam Chi Wah
原恆星
文章: 84
註冊時間: 週四 29 5月, 2008 17:31
來自: Hong Kong

文章 Lam Chi Wah » 週六 27 6月, 2009 00:17

Chanlunlun 寫:
Lam Chi Wah 寫:the mirror looks very beautiful.
Dear Mr. Lam,

Yes indeed.

A well polished mirror always looks pretty but don't be deceived by appearance. We must put the mirror into test before we are sure whether it's good or not.

Best regards
Chan Yuk Lun
é￾¡ç¥žï¼šæœ‰å†‡æƒ³é￾Žé–‹16"å￾‹ç£¨é￾¡ç￾­ï¼Ÿæˆ‘會好有興趣å￾ƒåŠ ã€‚

Br
John Lam

kai
白矮星
文章: 849
註冊時間: 週五 28 3月, 2008 15:35

文章 kai » 週六 27 6月, 2009 05:15

支持呀! 不過唔知搵地方會唔會難到M-G 呢? [疑惑] [疑惑]

Chanlunlun
夸克星
文章: 3847
註冊時間: 週四 09 10月, 2003 21:06

文章 Chanlunlun » 週日 28 6月, 2009 00:15

BossKwan 寫:Dear MG,

Where did you get the glasses ?
Dear Boss,

I just bought the glass disck from a shop in MongKok. The glass disk was cheap - only ay a cost of HKD 480. The glass is just conventional float glass.

Best regards
Chan Yuk Lun

回覆文章

回到「自製天文望遠鏡 Amateur Telescope Making 」

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 37 位訪客