The making of 30 in telescope - 6, 24 hrs of roughing

自製天文望遠鏡 牛頓望遠鏡 杜蘇式 卡式 設計和磨鏡方法<br>
佛科試鏡法 佛科刀片儀 光柵試鏡法 光柵片
回覆文章
Chanlunlun
夸克星
文章: 3847
註冊時間: 週四 09 10月, 2003 21:06

The making of 30 in telescope - 6, 24 hrs of roughing

文章 Chanlunlun » 週三 30 3月, 2005 08:51

Dear ATMs,

After 24 hours of rough grinding this is so far we have arrived :-

1. Focal length :- 177 inches
2. f/ratio :- f/5.9
3. Total volume of glass removed :- 112 cubic inches
4. Edge thickness :- 24.3 mm

It means that we have gone through half of the total way. We are looking forward to finish rough within the Easter holiday so that the whole polishing could be accomplished before the school』s open day.

Best regards
Chan Yuk Lun
29-3-2005
附加檔案
30_8.jpg
The 30 inch tool, together with the table, seem like to be in a mess after 24 hours of rough grinding. Notice that the tool has diameter exactly the width of the table.
30_8.jpg (93.06 KiB) 已瀏覽 8990 次
最後由 Chanlunlun 於 週三 30 3月, 2005 19:00 編輯,總共編輯了 1 次。

johnsonlee
中子星
文章: 1707
註冊時間: 週日 02 1月, 2005 20:41
來自: hk

文章 johnsonlee » 週三 30 3月, 2005 13:43

wa,好大塊鏡 :shock:

回覆文章

回到「自製天文望遠鏡 Amateur Telescope Making 」

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 20 位訪客